Home > All our airsoft guns > Out of the Workshop airsoft guns > RAGNAROK Series replicas OPS-Factory > Replica SA-P23 Prime Assaut Ragnarok

New

Replica SA-P23 Prime Assaut Ragnarok

Airsoft Replica Not for minors Restricted use

Ref. : AR0026725

, € *

instead of €

Eco-part

Of which ecotax : €

See in-store availability

Sold by :

Quantité minimum :

Add to cart

Obtenir un devis

Add to cart

For a total of , €

This purchase will give you Point(s)

Pay in installments

KEY FEATURES

Custom workshop replica
6.01 mm Lambda One precision barrel
Joint Hop Up 60° Maple Leaf
ASTER II Bluetooth GATE mosfet
Dark Matter brushless 27K motor
Theta Optics holographic sights

The technicians at theOPS Store have prepared a custom AEG SA-P23 Prime Assaut Ragnarok replica based on the Specna Arms SA-P23 Prime Aster II platform, offering an assault-oriented configuration.

Internally, we find a Lambda One precision barrel with a diameter of 6.01 mm and a length of 247 mm, a Hop-Up TDC Magnus chamber and a 60° Macaron Maple Leaf joint ensuring a stable and precise ball trajectory. The High Speed GATE piston head, Dark Matter 27K brushless motor and ASTER II Bluetooth MOSFET provide fast response and clean cycling, while giving you the option of programming. This MOSFET will also protect your replica from electrical damage, limiting the risk of over- or undervoltage, for example.

Externally, the SA-P is equipped with a 551 Theta Optics holographic sight and a 700-lumen SKYWOODS tactical light, making it easy to acquire your opponents in both daylight and darkness. A Double Bell AFG3 M-LOK grip and Double Bell CR-type stock make for a stable, confident acquisition. Finally, the Spitfire Warden tracer from 5KU will add realism to your games, while giving you a good indication of the trajectory of your balls.

This configuration offers a dynamic, reliable AEG replica ready for close engagements.

Workshop note: This replica has been tested with an 11.1v 1100mAh battery, at a temperature of 18°C, with a 0.30 g bbs, for a power of 1.66 J / 345 FPS.

Free shipping
from 79€

Warehouse in France
real-time stock

Pay in 3/4/10X
From 150€ to 3000€

Shipping
same day

Our compatible products

Bag of 3330 bbs 0.30g Precision BLS

15,90 €

Quick purchase

Lipo Charger E3 2S-3S SkyRC

26,90 €

See the product

Chargeur Mid-cap 125 billes S-Mag Noir pour M4 Specna Arms

11,90 €

Quick purchase

Battery LiPo 11.1v 1100mAh Stick DEAN VB

26,90 €

Quick purchase

Our expert's opinion

"This SA-P23 custom replica is very responsive, and the light switch is very practical for reacting to all kinds of situations. I particularly like the ASTER II Bluetooth, which lets me program my replica to suit my mood. "

Thomas
Workshop Technician

Description

In this SA-P23 Prime Assaut Ragnarok replica you'll find

Internal :

AEG 6.01mm x 247mm Lambda One precision barrel
Hop-Up TDC Magnus chamber
Hop Up 60° Macaron Maple Leaf gasket
High Speed GATE piston head
ASTER II Bluetooth mosfet
Dark Matter brushless 27K motor

External :

Replica SA-P23 Prime Aster II Black Specna Arms AEG
Tracer Unit Spitfire Warden Black 14mm CCW 5KU
Holographic sight type 551 Theta Optics
Tactical flashlight 700 Lumens Adere rechargeable SKYWOODS Picatinny
AFG3 M-LOK Black Double Bell tactical grip
CR type stock + extended buttpad black for M4 AEG Double Bell
Ultralight semi-hard case for long replicas Black GLARY CASE 85 cm

You'll benefit from a 24-month OPS-store warranty on all parts. It does not cover any opening or modification made by a third party outside OPS-store.

Please note that damage caused by the use of poor-quality balls other than those recommended on our product sheets will not be covered by warranty.

Frequently Asked Questions (FAQ)

How do I care for the AEG SA-P23 Prime Assaut Ragnarok replica?

Simply wipe the outside of the SA-P23 Prime Assaut Ragnarok replica with a dry or slightly dampened microfiber.

To clean the inside of the barrel, use the cleaning/cleaning rod with a piece of paper towel attached to the end.
Which battery should I use with the AEG SA-P23 Prime Assaut Ragnarok replica?

We recommend using a LiPo 11.1v 1100mAh battery with a T-dean connector with this AEG SA-P23 Prime Assaut Ragnarok replica.
Which bbs should I use with the AEG SA-P23 Prime Assaut Ragnarok replica?

Good quality 0.30g bbs are recommended for use with this SA-P23 Prime Assaut Ragnarok replica.
How to store your AEG SA-P23 Prime Assaut Ragnarok replica?

Store your SA-P23 Prime Assaut Ragnarok replica in a dry, ventilated area to avoid wear and corrosion.

We also recommend storing your battery in a protective LiPo bag.

Product contents

1 x SA-P23 Prime Assaut Ragnarok replica
2 x Mid-cap 125-bbs magazine S-Mag Black for M4 Specna Arms
1 x BB Loader
1 x Tool set
1 x Cleaning cloth
1 x Cleaning / deburrer rod
1 x Micro-USB / USB cable

Features

Custom replica
Caliber 6 mm
Propulsion AEG (LiPo double stick 7.4)
Battery slot Stock
Connections T-Dean
Wiring Rear
Shooting mode Safe / Semi / Auto
Energy (0.20g BBs) 1.66 Joules
Speed (0.20g BBs) 423 FPS
Test Bench Power / Velocity: 1.66 Joules / 345 FPS | BBs / Battery Used: 0.30 g / 11.1V 1100mAh
Length 695 / 780 mm
Weight 2690 g
Canon internal model Lambda one precision barrel
Internal barrel length 247 mm
Internal barrel diameter 6.01 mm
Recommended grammage 0.30 g
Integrated tactical rail M-LOK / Picatinny
Charger Mid-cap x2
How it works Adjustable Hop Up
Engine Dark Matter brushless 27K
Gearbox Version Version 2
Mosfet ASTER II Gate
Gears 16:1 CNC
Body Metal
Colors Black
Brand OPS Factory

Warning message

Important note concerning the use of this product : This product is a replica weapon intended for recreational use (role-playing games) known as "airsoft", the sale of which is prohibited to minors (under 18 years of age). By adding this product to your basket, you acknowledge that you are over 18 and that you are familiar with the basic safety rules for using this type of replica (wearing protective glasses and/or mask, suitable location, etc.).

Please note that the power ratings given for airsoft replicas may vary depending on supplier availability. We invite you to contact us for more details before your purchase in order to have a more precise measurement carried out by us. Consequently, OPS-Store cannot be held responsible for any discrepancies between supplier data and actual measurements.

This replica comes from our workshop. We have carried out all the tests during assembly and before shipping in order to guarantee the best performance. If you notice a problem when you open the parcel or during the first shots, contact us directly at 02.35.00.30.01 or by email.

All our customs or full upgrades are tested and recommend a type of gas, pellets or battery. If you do not follow the recommendations, you will lose your warranty.

Please note that original parts are not supplied with the finished product.

You will benefit from a 12-month OPS-store warranty on all parts and assembly. It does not cover any opening or modification by a third party, or failure to comply with the recommendations on the product sheet or below:

Regular maintenance as recommended by our workshop
Respect the running-in time for the various seals and chargers
Use good quality bbs (Swiss Arms, RWA, BLS)
Do not use BIO bbs from a bag that has been open for more than a few days
Do not use silicone or oil in magazines, Gearboxes, chambers / Hop-up seals

We recommend compatible components in the product data sheet. If you have any questions, please contact us by telephone or via this link: https://support.ops-store.fr/ .