Français
Español
Description
Video presentation of the AuraMist tracer silencer from ACETECH
The ACETECH AuraMist tracer suppressor: an immersive, water-based visual experience
The ACETECH AuraMist is an all-in-one tracer suppressor designed for airsoft players seeking a complete and realistic visual effect without the limitations of traditional oil-based systems. By combining a tracer function for glow-in-the-dark BBs, an LED flash that simulates a muzzle flame, and a water vaporization system to reproduce the smoke effect, the AuraMist offers up to seven mode combinations that can be activated depending on the desired effect. It is suitable for players in both outdoor and indoor games, as well as cosplay enthusiasts and demonstration organizers. Weighing approximately 65 g (module only) and featuring a universal 14 mm counterclockwise (CCW) thread, it can be easily mounted on the vast majority of AEG, GBB, or HPA replicas.
Clean, residue-free water vaporization technology
Whereas conventional tracers use mineral oil to generate the mist, the AuraMist uses only water. This approach offers a direct and tangible advantage: no oily residue is deposited in the inner barrel or the hop-up chamber, eliminating any risk of fouling caused by the tracer itself. The built-in 4.2 ml reservoir can be easily filled with tap water through a front-access inlet—without disassembly—using the supplied syringe bottles. For those who wish to intensify the mist effect and add a scent, the AuraMist can accommodate one to two drops of essential oil diluted in water; do not exceed this dosage to preserve the vaporizer. Once the session is complete, the automatic drying function flushes and dries the unit and the internal chamber, extending the component’s lifespan.
Seven combinable effect modes and intelligent power management
The AuraMist offers seven combinations of independent or combined effects: trace only, LED flash only, mist only, trace + flash, trace + mist, flash + mist, and the full combination of trace + flash + mist. Each mode is designed for a different use case, from nighttime events where the tracer function visually guides shots, to indoor demonstrations where the fog and flash create a cinematic effect. The unit is powered by a USB-C rechargeable Li-Ion battery, with a charging time of approximately 2.5 hours. To conserve power, a standby mode automatically activates after five minutes of inactivity. A built-in self-diagnostic system continuously monitors the status of the sensors and the unit’s proper functioning. The supported rate of fire reaches 35 shots per second, which easily accommodates even the most responsive AEG or HPA setups. The AuraMist is compatible with standard 6 mm BBs as well as 6 mm green and red tracer BBs.
A removable module compatible with other dummy silencers
One of the AuraMist’s distinctive features is its modular design. The internal module can be removed from its original housing and installed in a third-party dummy silencer with an inner diameter of 37.6 mm. For silencers with a slightly larger diameter, shimming is possible to ensure the module is centered. This modularity allows the AuraMist to be adapted to the replica’s aesthetics without sacrificing its functionality. In terms of connectivity, the native thread is 14 mm CCW.
Frequently asked questions (FAQ)
- What types of replicas are compatible with the ACETECH AuraMist tracer suppressor?
This model attaches to any 14 mm CCW (counterclockwise) thread, making it compatible with most long and pistol-sized replicas on the market. A 12 mm CW to 14 mm CCW adapter is also included in the box to facilitate installation on certain specific models.
- What BBs should be used to take full advantage of all features?
The AuraMist tracer effectively illuminates 6 mm green and red tracer BBs, while also being compatible with standard BBs for flash and smoke effects. However, it is not compatible with gel-type BBs.
- How does the smoke simulation at the barrel exit work?
The unit uses an innovative water vaporization system combined with high-power LEDs to create a realistic mist and flame effect. Unlike oil-based systems, this technology leaves no greasy residue in your inner barrel or hop-up unit.
- Can you customize the visual effects when firing?
Yes, the AuraMist offers seven different mode combinations, allowing you to activate the tracer, LED flash, and mist independently or simultaneously. This lets you choose to use only the tracer function for discretion or the full combo for maximum realism.
- How do you refill the reservoir?
Filling is made easy with the included dropper bottle, as the fill port is directly accessible on the front of the unit. With a capacity of 4.2 ml, the reservoir uses tap water and can accommodate one to two drops of diluted essential oil to increase the mist volume.
- Does the AuraMist silent tracer require any specific maintenance after a game?
The device includes an automatic drying function (auto-dry) to protect the internal components from moisture after use. It also features a self-diagnostic mode to check the condition of the sensors and automatically enters standby mode after 5 minutes of inactivity.
- What rate of fire can this device handle?
The AuraMist's electronics are designed to handle high rates of fire of up to 35 BBs per second (RPS). This ensures perfect synchronization of the light effects and mist, even during intense bursts of automatic fire.
- Is it possible to install the internal module in another accessory?
Thanks to its modular design, the electronic core can be removed and installed in other dummy silencers with an internal diameter of 37.6 mm. For larger diameters, the module's fit can be adjusted using shims.
Product content
1 x ACETECH AuraMist Tracer Silencer
2 x Water-filling syringe bottles
1 x User Manual
Features
- Plotter
- Brand
- Model
- No screws
- Power supply
- Supported speed
- Composition
- Length
- Diameter
- Weight
