Our expert's opinion

" I like this setup because the work isn't limited to just adding a brushless motor or a MOSFET: the entire mechanical system has been designed to form a cohesive whole. The combination of the ASTER II, SOLINK 28K, and a complete internal overhaul significantly enhances the AK STORM while preserving the unique character of the Tokyo Marui Next Gen platform. "
Alexis
Workshop Technician
Description
In this fully upgraded AK STORM Next Gen Brushless ASTER II OPS-FACTORY replica, you'll find
- AK STORM Next Gen Black Tokyo Marui AEG replica
- ASTER II Bluetooth V3 Expert Rear Wiring GATE
- Lite PLUS 28K brushless motor (short shaft) ? long shaft for SOLINK AEG replica (short shaft)
- Raizen AEG Precision Barrel 6.05mm x 303mm by Da Vinci Airsoft
- Maple Leaf 60° Hop-Up Gas Ring
- Omega 80° Silicone Hop-Up Tensioner (Solid Edition) by Maple Leaf
- 14-Tooth AK/G36 Piston with Recoil Shock Next Gen by Marui FPS Softair
- Next Gen FPS Softair POM Piston Head with Ball Bearing
- 21:1 Gearset Ratio
- GUARDER SP100 Spring
- V3 SHS Ball-Bearing Spring Guide
You’ll receive a 24-month OPS-store warranty on all parts. This warranty does not cover any openings or modifications made by a third party outside of OPS-store.
Please note that damage caused by the use of low-quality BBs other than those we recommend in our product listings will not be covered under warranty.
Frequently asked questions (FAQ)
- What is the base model used for this AK STORM Full Upgrade?
This configuration is based on the black Tokyo Marui AK STORM Next Gen AEG.
- What electronic system is installed in the replica?
The replica is equipped with an ASTER II Bluetooth V3 Expert GATE with rear wiring.
- What motor is in this replica?
OPS Factory has installed a SOLINK Lite PLUS 28K short-shaft brushless motor.
- Has the transmission also been modified?
Yes, this configuration features a gearset with a 21:1 ratio, as well as a 14-tooth FPS Softair piston for the AK/G36 Recoil Shock Next Gen.
- What precision barrel is fitted to the AK STORM?
It features a 6.05 x 303 mm Da Vinci Airsoft Raizen AEG precision barrel.
- What Hop-Up setup is installed?
The setup combines a 60° Maple Leaf Macaron gas ring with an 80° Omega Solid Edition Maple Leaf silicone tensioner to ensure consistent Hop-Up pressure and a stable trajectory.
- Why is this configuration referred to as a ?Full Upgrade??
The modification involves several major components of the replica: the electronic control system, motor, gearbox, compression chamber, barrel, and Hop-Up system.
- Does the replica retain its Next Gen Tokyo Marui base?
Yes, the modification is based on the Tokyo Marui Next Gen AK STORM and specifically uses components designed for the Next Gen Recoil Shock mechanism.
Product content
1 x Full Upgrade AK STORM Next Gen Brushless ASTER II OPS-FACTORY Replica
1 x 90-bbs metal magazine
1 x Set of 3 M-LOK rail covers
1 x Set of 3 Picatinny rails (S/M/L)
1 x Micro Pro Sight Mount
1 x Hand Stop
Features
- Custom replica
- Caliber 6 mm
- Propulsion AEG
- Battery slot Hand guard
- Connections Dean
- Wiring Before
- Shooting mode Safe - Semi
- Speed (0.20g BBs) 350 FPS
- Minimum Length 715 mm
- Maximum Length 790 mm
- Canon internal model Lambda Five precision cannon
- Internal barrel length 303 mm
- Internal barrel diameter 6.05 mm
- Recommended grammage 0.25 - 0.28 - 0.30 g
- Charger 90 bbs
- Blowback Yes (Recoil Shock)
- Engine Brushless 28k Solink
- Mosfet Aster II Bluetooth
- Colors Black
- Brand OPS-Factory
Downloads
Warning message
Important note concerning the use of this product : This product is a replica weapon intended for recreational use (role-playing games) known as "airsoft", the sale of which is prohibited to minors (under 18 years of age). By adding this product to your basket, you acknowledge that you are over 18 and that you are familiar with the basic safety rules for using this type of replica (wearing protective glasses and/or mask, suitable location, etc.).
Please note that the power ratings given for airsoft replicas may vary depending on supplier availability. We invite you to contact us for more details before your purchase in order to have a more precise measurement carried out by us. Consequently, OPS-Store cannot be held responsible for any discrepancies between supplier data and actual measurements.
This replica comes from our workshop. We have carried out all the tests during assembly and before shipping in order to guarantee the best performance. If you notice a problem when you open the parcel or during the first shots, contact us directly at 02.35.00.30.01 or by email.
All our customs or full upgrades are tested and recommend a type of gas, pellets or battery. If you do not follow the recommendations, you will lose your warranty.
Please note that original parts are not supplied with the finished product.
You will benefit from a 12-month OPS-store warranty on all parts and assembly. It does not cover any opening or modification by a third party, or failure to comply with the recommendations on the product sheet or below:
- Regular maintenance as recommended by our workshop
- Respect the running-in time for the various seals and chargers
- Use good quality bbs (Swiss Arms, RWA, BLS)
- Do not use BIO bbs from a bag that has been open for more than a few days
- Do not use silicone or oil in magazines, Gearboxes, chambers / Hop-up seals
We recommend compatible components in the product data sheet. If you have any questions, please contact us by telephone or via this link: https://support.ops-store.fr/ .