Home > Upgrade > AEG internal parts > Barrels > Précision 6.01 mm inner barrel for AEG replica PDI
New

Précision 6.01 mm inner barrel for AEG replica PDI

Ref. : AR0030716
, € *
instead of €
Eco-part
Of which ecotax : €
Make your choice
  • 347 mm - In stock
  • 303 mm - In stock
  • 270 mm - In stock
  • 247 mm - In stock
See in-store availability
Sold by :
Quantité minimum :
-
+
-
+
Add to cart
Add to cart
Add to cart
Add to cart
For a total of , €

This purchase will give you Point(s)

Payez en plusieurs fois
KEY FEATURES
  • SUS304 steel AEG inner barrel
  • 6.01 mm inner diameter with a tolérance of ±0.002mm
  • Superior corrosion résistance compared to standard barrels
  • Available in multiple lengths

The PDI AEG 6.01 mm précision barrel for AEG replica is a high-end replacement inner barrel, designed and manufactured by PDI. Part of the PDI 01 series, it stands out with a 6.01 mm diameter in SUS304 stainless steel and a tolérance of ±0.002 mm, offering a machining précision significantly higher than the PDI Raven series. It features an outer diameter of 8.55 mm.

This inner barrel is aimed at airsoft players looking to replace their stock barrel with a SUS304 stainless steel model, with a tight tolérance that limits BB play during its passage. Available in multiple lengths within the PDI 01 series, it represents a solid foundation for a précision-oriented AEG build.

Free shipping
free from 79?

Warehouse in France
real-time stock

Pay in 3/4/10X
From 150? to 3000?

Shipping
within the day

Description

The PDI 6.01 mm AEG précision barrel, a machining tolérance that makes the difference

The PDI 6.01 mm AEG précision barrel is an internal part designed to replace the stock inner barrel of a compatible AEG replica. Made from SUS304 stainless steel and machined to a tolérance of ± 0.002 mm on the inner diameter, it is aimed at airsoft players looking to improve their replica's précision through a targeted upgrade. Its design is based on a 6.01 mm inner diameter, which reduces the gap between the BB and the barrel wall, for more consistent guidance with every shot.


SUS304 stainless steel construction and machining précision

This barrel belongs to the PDI 01 range, which is distinct from the same manufacturer's Raven range. This distinction is reflected in particular by a tolérance of ± 0.002 mm on the inner diameter, compared to ± 0.007 mm for the Raven range. SUS304 stainless steel offers optimal corrosion résistance, which helps maintain the machining characteristics over time. The outer diameter is 8.55 mm.


Compatibility by length and targeted configurations

The PDI 6.01 mm précision barrel is available in several lengths, each designed for a specific configuration. The 247 mm version is designed for G36C and P90 Tokyo Marui type replicas. The 270 mm version is suited for use with the PDI SCAR CQC outer barrel. The 303 mm version targets M733 and VSR-10 G-SPEC Tokyo Marui type replicas. The 347 mm version is intended for replicas fitted with a PDI Type 89 Short outer barrel. These pairings are provided as guidance by the manufacturer, and actual compatibility must be verified on a case-by-case basis according to the real configuration of the replica.


Installation and field use

Replacing the stock inner barrel with a PDI 6.01 mm barrel is carried out as part of an internal upgrade on a compatible AEG replica. This type of upgrade requires careful handling of the internal parts, particularly the hop-up, in order to ensure correct alignment between the new barrel and the other components of the compression chamber. The inner diameter tolérance requires the use of quality BBs, consistent in diameter and weight, to fully take advantage of the barrel's machining characteristics. This product is aimed at airsoft players who already have experience with internal upgrades.

Product content

1 x PDI AEG 6.01 mm précision inner barrel for AEG replica

Features

  • Precision Barrel
  • Lenght 247 mm to 347 mm
  • Diameter 6.01 mm
  • Brand PDI
  • Composition SUS304 stainless steel
  • Particularity Cold forging