Replica SA-FX01 Gen2 FLEX HAL ETU Specna Arms AEG

The SA-FX01 FLEX Gen2 HAL ETU, a replica with a Light Ops stock, a Dark Matter 27K brushless motor and a HAL mosfet for customization

The AEG SA-FX01 FLEX Gen.2 airsoft replica has been designed to meet a clear demand: to offer an affordable replica that's highly effective right out of the box, yet easy to set up and upgrade. Specna Arms positions the FLEX Gen.2 range as an accessible series for performance- and mobility-oriented airsoft beginners, at an attractive price combined with a quick spring-change system and a selection of interesting internal parts.

The outer barrel, Light Ops stock and pistol grip are made of nylon-fiber-reinforced polymer, with enhanced resistance to wear and impact. Aluminum and zinc are used for components such as the flash hider, cocking lever and fire selector, to ensure the durability of the most heavily used parts. The Light Ops stock is the signature element of this version. Minimalist, stretchable and lightweight, it features non-slip rubber inserts on the cheeks and a rubber buttpad designed to sit comfortably on the shoulder.

On the performance side, the replica relies on the rotating Hop-Up TDC Magnus™ chamber (TDC = Top Down Center), designed to offer a more stable and precise adjustment. It is combined with the Helium™ Flat Hop Eraser, designed to improve ball stability via a more constant support. The precision 6.03 mm diameter internal barrel completes the package for a straighter, more uniform trajectory even over long distances.

The internals are based on the Æther™ gearbox, with reinforced frame, compatible up to M140 springs, leaving scalability to adapt it according to terrain limitations or your needs. The internals also include 8mm bearings, steel gears and a polycarbonate piston with metal teeth, a coherent package to withstand regular use and maintain good cycle consistency. The SA-FX01 stands out above all for the integration of a Specna Arms Dark Matter™ High Speed 27K brushless motor, an interesting choice for achieving excellent firing rate and responsiveness.

The element that sets this replica apart from others is the HAL™ ETU mosfet, based on magnetic sensor trigger detection (Hall effect). It allows you to customize firing behavior and improve responsiveness thanks to functions such as active brake, binary mode, 5-level adjustable sensitivity, 6-level adjustable pre-cocking, as well as AUTO and SEMI programmable firing modes. Programming via the trigger means you can quickly adjust settings without the need for additional hardware.

Finally, the replica incorporates the ESA™ quick-change spring system, a tangible advantage for quickly and easily adapting power to terrain constraints or according to your needs. The SA-FX01 Gen2 FLEX HAL ETU combines a lightweight, well-tuned construction, a constant internal, a Dark Matter 27K brushless motor and a HAL mosfet, making it a particularly interesting platform for mobility-based play.

• How do I maintain my SA-FX01 Gen2 FLEX HAL ETU Specna Arms AEG replica?

  For regular maintenance of your SA-FX01 Gen2 FLEX HAL ETU Specna Arms AEG replica, you can clean the inside of the barrel with a piece of paper towel at the end of a cleaning/cleaning rod.

  A simple wipe with a dry or slightly dampened microfiber is all it takes to clean the outside of the replica.

• Which battery should I use with the SA-FX01 Gen2 FLEX HAL ETU Specna Arms AEG replica?

  The stock tube of the SA-FX01 Gen2 FLEX HAL ETU Specna Arms AEG replica supports an 11.1V LiPo battery with T-dean connectivity in single or double stick versions.

• Which bullets should I use with the SA-FX01 Gen2 FLEX HAL ETU Specna Arms AEG replica?

  We recommend using high-quality 0.25g bbs with this SA-FX01 Gen2 FLEX HAL ETU Specna Arms AEG replica.

• How to store your SA-FX01 Gen2 FLEX HAL ETU Specna Arms AEG replica?

  Store your SA-FX01 Gen2 FLEX HAL ETU Specna Arms AEG replica in a dry, ventilated area to prevent wear and corrosion.

  We also recommend storing your battery in a protective LiPo bag.

1 x Replica SA-FX01 Gen2 FLEX HAL ETU Specna Arms AEG
1 x Hi-cap 250-bbs S-Mag magazine
1 x Additional M90 spring
1 x T-Dean / Mini Tamiya adapter

• Replicas
• Caliber 6 mm
• Propulsion AEG (11.1v LiPo Battery stick not included)
• Battery slot Stock Tube
• Connections T-Dean
• Shooting mode Programmable : Safe / Semi / Auto / 2rd Burst / 3rd Burst / Binary / AUG / Sniper
• Energy 1.1 Joules
• Speed 344 FPS
• Minimum Length 670 mm
• Maximum Length 755 mm
• Weight 1990 g
• Internal barrel length 230 mm
• Internal barrel diameter 6.03 mm
• No screws 14 mm CCW
• Integrated tactical rail M-LOK / Picatinny
• Charger 1 x Hi-Cap 250 bbs
• How it works Adjustable Hop Up
• Quick spring change Yes (ESA™)
• Gearbox Version V2 Æther™
• Integrated mosfet Yes (HAL)
• Body Polymer
• Brand Specna Arms