Replica SA-PJ25 PRIME Aster II ETU Specna Arms AEG

SA-PJ25 PRIME Aster II ETU Specna Arms AEG: a replica combining metal and real wood, designed to perform and adapt to situations and its user

The SA-PJ25 PRIME is part of the Specna Arms philosophy, with a Prime™ J-Series line thought to provide an immediately effective replica in the field. This line combines the base of the J-Series Edge 2.0™ with new internal parts and a higher level of finish, to achieve high performance and durability right out of the box. One of the highlights is the integration of the Specna Arms Magnus hop-up chamber with TDC adjustment, designed to offer a more stable and precise reglage, particularly appreciated when you want to maintain a steady trajectory over time.

Externally, the SA-PJ25 PRIME offers an interesting balance between "traditional" realism and modern requirements. The replica features metal receivers and is designed in metal, with steel components including the barrel, outer barrel, trigger guard, magazine knob, selector, rear QD attachment point and steel folding stock. Aluminum is used for key parts such as the sights, muzzle device and cocking lever. The real-wood handguard gives the pistol a distinct visual identity and a very authentic feel in hand, clearly distinguishing this version within the range. The pistol grip and mid-cap magazines are made of polymer, to maintain a practical grip and good balance on the items being handled.

The SA-PJ25 also benefits from a Nano Coating finish designed to limit marks and scratches, with an individual serial number on the barrel. At the end of the barrel, the black metal flame arrestor is mounted on a 24 mm CW thread. For everyday practicality, the battery compartment is located under the dust cover, with space provided for a stick-type battery, which remains consistent with the replica's architecture and facilitates the integration of a suitable LiPo.

Internally, Specna Arms highlights a reinforced configuration designed for stable performance over time. These include 8 mm bearings, a steel cylinder, 16:1 steel CNC gears, and a reinforced piston with steel teeth. Precision is ensured by the combination of a 6.02 mm barrel, the Magnus TDC rotating hop-up chamber and the Helium Flat Hop gasket, designed to stabilize support and improve trajectory consistency. The heads and nozzle are announced as aluminum, while propulsion is entrusted to a Specna Arms DarkMatter™ High Speed 27K brushless motor, appreciated for its good rate of fire and efficiency.

Electronic management is provided by the Bluetooth-enabled GATE ASTER II ETU. The ASTER II gives access to settings and telemetry on mobile and compatible devices, while adding advanced functions such as active brake adjustable from 0 to 100%, pre-cocking (0 to 5) and de-cocking to preserve springs and gears, a sniper mode, low battery warning, improved cycle detection, and additional protection via a multi-layer PCB with EMC shielding. Trigger setting is advertised without restriction, including reset adjustment, and firmware updates are available free of charge via the GCS app, allowing patches and new features to be added. The replica comes with 2 mid-cap polymer 175 ball magazines, Deans connectors and a mini-Tamiya adapter.

The result is an AK-type replica with a more traditional appearance, excellent performance and the ability to be fine-tuned down to the last detail.

• How do I maintain my SA-PJ25 PRIME Aster II ETU Specna Arms AEG replica?

  For regular maintenance of your SA-PJ25 PRIME Aster II ETU Specna Arms AEG replica, you can clean the inside of the barrel with a piece of paper towel at the end of a cleaning/cleaning rod.

  A simple wipe with a dry or slightly dampened microfiber is all it takes to clean the outside of the replica.

• Which battery should I use with the SA-PJ25 PRIME Aster II ETU Specna Arms AEG replica?

  The Top Cover of the SA-PJ25 PRIME Aster II ETU Specna Arms AEG replica supports a 7.4v LiPo battery with T-dean connectivity in single or double stick versions.

• Which bbs should I use with the SA-PJ25 PRIME Aster II ETU Specna Arms AEG replica?

  We recommend using high-quality 0.25g bbs with this SA-PJ25 PRIME Aster II ETU Specna Arms AEG replica.

• How to store your replica SA-PJ25 PRIME Aster II ETU Specna Arms AEG?

  Store your SA-PJ25 PRIME Aster II ETU Specna Arms AEG replica in a dry, ventilated area to avoid wear and corrosion.

  We also recommend storing your battery in a protective LiPo bag.

1 x SA-PJ25 PRIME Aster II ETU Specna Arms AEG replica
2 x S-MAG Mid-Cap 175 bbs magazines
1 x Additional M135 spring
1 x Additional M90 spring
1 x T-Dean / Mini Tamiya adapter
1 x BB Loader
1 x Cleaning / deburrer rod

• Replicas
• Caliber 6 mm
• Propulsion AEG (7.4v LiPo Battery stick not included)
• Battery slot Top Cover
• Connections T-Dean
• Shooting mode Safe / Semi / Auto
• Energy 1.05 Joules
• Speed 336 FPS
• Minimum Length 495 mm
• Maximum Length 730 mm
• Weight 2960 g
• Internal barrel diameter 6,02 mm
• No screws 14 mm CCW
• Integrated tactical rail M-LOK / Picatinny
• Charger 2 x Mid-Cap 175 bbs
• How it works TDC hop up adjustable
• Quick spring change Yes (ESA2™)
• Engine Brushless Dark Matter™ High Speed 27k
• Integrated mosfet ASTER II Bluetooth GATE
• Gears 16:1 CNC
• Body Metal
• Brand Specna Arms