Replica SA-F08 Gen2 FLEX HAL ETU Specna Arms AEG

SA-F08 FLEX Gen2 HAL ETU, a lightweight carbine replica with RRA handguard and HAL mosfet

The SA-F08 FLEX Gen.2 has been designed by Specna Arms to offer an affordable yet technically serious replica, designed for immediate effectiveness in the field. The philosophy behind the FLEX Gen.2 range is to offer a better user experience and more accomplished original performance, by integrating a consistent hop-up/gun base, reinforced mechanics and electronics capable of customizing shooting behavior without the need for immediate upgrades.

Externally, the replica is designed for lightness and durability. The body is made of nylon-fiber-reinforced polymer, renowned for its high strength and matte finish with a rougher texture. The most stressed parts are made of metal to ensure long-lasting durability, in particular the flame arrestor, outer barrel, firing selector, mag release and cocking lever. The front of the replica features a Rock River Arms®-licensed RRA Lightweight Free Float handguard to M-LOK standard, complemented by Picatinny rails for easy installation of a light, laser or tactical grip, depending on your needs. The outer barrel has a 14 mm CCW thread, ideal for screwing on a dummy silencer or tracer unit. Fold-down sights are supplied as standard, enabling you to acquire mechanical opponents that can be folded down to facilitate the use of sighting optics.

On the performance side, precision relies on the rotating TDC Magnus™ hop-up chamber (TDC = Top Down Center), designed to offer particularly highly precise adjustment. It is complemented by a Helium™ Flat Hop Eraser, designed to improve trajectory stability thanks to a more even support on the ball. The whole assembly is combined with a high-quality 6.03 mm precision barrel, providing a uniformly straight trajectory even over long distances.

These internal parts are articulated around the Æther™ gearbox with reinforced frame. Specna Arms highlights a reliability-oriented design, with a main spring release function, inspection windows (pre-cocking and AoE), reinforced façwindows, trigger adjustment function and frame alignment points. Compatibility with springs up to M140 allows you to adapt your replica to the limits imposed on the field or to your needs. There are also 8 mm bearings, steel gears and a polycarbonate piston with metal teeth for regular use.

The central element of this SA-F08 Gen2 remains the HAL™ ETU, based on magnetic sensor trigger detection (Hall effect). This system brings responsiveness and advanced settings, with active brake, binary trigger, 5-level adjustable sensitivity, 6-level adjustable pre-cocking, and programmable AUTO and SEMI firing modes. Programming via the trigger simplifies adjustments in the field, while a low-battery alarm ensures safe use. The system is compatible with brushless motors, allowing the player to upgrade if the need arises. Finally, the replica incorporates the ESA™ quick-change spring system, to quickly adapt power to playing constraints easily and quickly.

In short, the SA-F08 Gen2 FLEX HAL ETU is aimed at players looking for a lightweight, modern replica that can be upgraded right out of the box.

• How do I maintain my SA-F08 Gen2 FLEX HAL ETU Specna Arms AEG replica?

  For regular maintenance of your SA-F08 Gen2 FLEX HAL ETU Specna Arms AEG replica, you can clean the inside of the barrel with a piece of paper towel at the end of a cleaning/cleaning rod.

  A simple wipe with a dry or slightly dampened microfiber is all it takes to clean the outside of the replica.

• Which battery should I use with the SA-F08 Gen2 FLEX HAL ETU Specna Arms AEG replica?

  The stock tube of the SA-F08 Gen2 FLEX HAL ETU Specna Arms AEG replica supports an 11.1v LiPo battery with T-dean connectivity in single or double stick versions.

• Which bbs should I use with the SA-F08 Gen2 FLEX HAL ETU Specna Arms AEG replica?

  We recommend using high-quality 0.25g bbs with this SA-F08 Gen2 FLEX HAL ETU Specna Arms AEG replica.

• How to store your SA-F08 Gen2 FLEX HAL ETU Specna Arms AEG replica?

  Store your SA-F08 Gen2 FLEX HAL ETU Specna Arms AEG replica in a dry, ventilated area to prevent wear and corrosion.

  We also recommend storing your battery in a protective LiPo bag.

1 x Replica SA-F08 Gen2 FLEX HAL ETU Specna Arms AEG
1 x S-Mag Hi-Cap 380 bbs magazine
1 x Additional M90 spring
1 x T-Dean to Mini Tamiya adapter
1 x Cleaning / deburrer rod

• Replicas
• Caliber 6 mm
• Propulsion AEG (11.1v LiPo Battery stick not included)
• Battery slot Crosse / Tube de crosse
• Connections T-Dean
• Shooting mode Programmable : Safe / Semi / Auto / 2rd Burst / 3rd Burst / Binary / AUG / Sniper
• Energy 1.1 Joules
• Speed 344 FPS
• Minimum Length 680 mm
• Maximum Length 765 mm
• Weight 2210 g
• Internal barrel length 255 mm
• Internal barrel diameter 6.03 mm
• No screws 14 mm CCW
• Integrated tactical rail M-LOK / Picatinny
• Charger 1 x Hi-cap 380 bbs
• How it works Adjustable Hop Up
• Quick spring change Yes (ESA™)
• Gearbox Version V2 Æther™
• Integrated mosfet Yes (HAL)
• Gears Steel
• Body Reinforced polymer
• Brand Specna Arms