Replica SA-F09 FLEX HAL ETU Gen 2 Specna Arms AEG

The SA-F09 FLEX HAL ETU Gen 2 Specna Arms AEG, an optimized AR15/M4 replica with HAL ETU

The Specna Arms AEG SA-F09 FLEX Gen 2 airsoft replica has been developed to offer a replica that's both affordable and performance- and user-experience-oriented. Specna Arms has reworked the FLEX series with its Gen.2 to provide a replica that is immediately operational in the field, with internal parts choices usually reserved for more prestigious ranges. This version is distinguished by the integration of the rotating TDC Magnus™ hop-up chamber, designed for highly precise adjustment thanks to its "Top Down Center" principle, as well as by the addition of a Helium™ Flat Hop Eraser aimed at improving trajectory stability. The package is completed by a 6.03 mm precision barrel offering consistent trajectory even over long distances. added to this is the ESA™ quick spring change system, which makes it quick and easy to adapt the power according to the rules of the terrain or to the way you play, a real advantage if you alternate between CQB, outdoor or between the different limits depending on the associations.

The other distinguishing feature of the SA-F09 is the HAL™ ETU mosfet. This system is based on trigger detection via Hall-effect magnetic sensors, enabling excellent responsiveness and advanced programming. The HAL features an active brake, a binary mode, trigger sensitivity adjustable on 5 levels (from 20 to 100%) and pre-cocking adjustable on 6 levels. Firing modes are programmable in AUTO and SEMI, including burst (3 or 5 shots) and specific firing profiles, while allowing programming via the trigger. A low battery alarm is integrated, and compatibility with brushless motors offers interesting scope for evolution if you're looking for a more responsive rate of fire.

In terms of design, the replica features a lightweight architecture with a nylon-fiber-reinforced polymer body, characterized by good strength and a "rough" texture. The flame arrestor, outer barrel, firing selector, QD attachments and cocking lever are made of metal, for a realistic look. The SA-F09 is fitted with an M-LOK-standard RRA Lightweight Free Float front handguard (licensed by Rock River Arms®) with rails, enabling the addition of a light, laser or sighting optic. The barrel is finished off with a 14 mm CCW thread mount, allowing you to install a dummy silencer or tracer as desired.

All in all, the SA-F09 FLEX HAL ETU Gen 2 targets the player who wants a lightweight, high-performance AR15/M4-type replica. Its high-quality internals and HAL mosfet enable fine-tuning of the replica's behavior. It's designed to be efficient out of the box, while leaving plenty of scope for customization via its firing modes and trigger settings.

• How to maintain your SA-F09 FLEX HAL ETU Gen 2 Specna Arms AEG replica?

  For regular maintenance of your SA-F09 FLEX HAL ETU Gen 2 Specna Arms AEG replica, you can clean the inside of the barrel with a piece of paper towel at the end of a cleaning/clearing rod.

  A simple wipe with a dry or slightly dampened microfiber is all it takes to clean the outside of the replica.

• Which battery should I use with the SA-F09 FLEX HAL ETU Gen 2 Specna Arms AEG replica?

  The stock tube of the SA-F09 FLEX HAL ETU Gen 2 Specna Arms AEG replica supports a 7.4V LiPo battery with T-dean connectivity in single or double stick versions.

• Which bbs should I use with the SA-F09 FLEX HAL ETU Gen 2 Specna Arms AEG replica?

  We recommend using high-quality 0.25g bbs with this SA-F09 FLEX HAL ETU Gen 2 Specna Arms AEG replica.

• How to store your SA-F09 FLEX HAL ETU Gen 2 Specna Arms AEG replica?

  Store your SA-F09 FLEX HAL ETU Gen 2 Specna Arms AEG replica in a dry, ventilated area to prevent wear and corrosion.

  We also recommend storing your battery in a protective LiPo bag.

1 x Replica SA-F09 FLEX HAL ETU Gen 2 Specna Arms AEG
1 x S-Mag High-Cap 380 bbs magazine
1 x Additional M90 spring
1 x Cleaning / deburrer rod

• Replicas
• Caliber 6 mm
• Propulsion AEG (7.4v LiPo Battery stick not included)
• Battery slot Stock Tube
• Connections T-Dean
• Shooting mode Safe / Semi / Auto
• Energy 1.1 Joules
• Speed 344 FPS
• Minimum Length 800 mm
• Maximum Length 880 mm
• Weight 2370 g
• Internal barrel length 375 mm
• Internal barrel diameter 6.03 mm
• No screws 14 mm CCW
• Integrated tactical rail M-LOK / Picatinny
• Charger 1 x Hi-cap 380 bbs
• How it works Adjustable Hop Up
• Quick spring change Yes (ESA™)
• Gearbox Version V2 Æther™
• Integrated mosfet Yes (HAL)
• Body Polymer
• Brand Specna Arms