OPS Store
02 35 00 30 01MON-FRI 9am-12.30pm / 1.30pm-6pm
Real-time stock
Free delivery on orders over 79?
Same day shipping
Payment in 3/4/10x up to 5000?
Customer service and warehousing in France
FROM 06/01 TO 06/14 INCLUDED,GET -10% ON TOKYO MARUI !
The SA-FH06 FLEX Gen2 was developed to offer a replica that is immediately upgrade-ready by combining a modern HK416-style platform with reinforced internals and advanced electronic controls. The philosophy behind the FLEX Gen2 line is clearly defined: to enhance players’ experience and the performance of their replicas, resulting in a replica that’s ready to play right out of the box.
Externally, Specna Arms strikes an effective balance between lightness and durability. The body is made of nylon-fiber-reinforced polymer, chosen for its strength, rougher texture, and matte finish. To ensure resistance to wear and impact, certain parts are made of metal to guarantee long-term durability, including the flash hider, outer barrel, ejection port, fire selector, magazine release, pins, sights, and the cocking lever. The SA-FH06 also features a functional bolt catch, a detail that enhances realism during handling.
The replica features a 6-position retractable stock with a rubber buttpad to stabilize your aim at opponents, as well as an ergonomic pistol grip. Modularity remains a key feature of the SA-FH06, with a handguard equipped with a set of Picatinny rails and a top rail on the receiver, allowing you to quickly and easily mount a scope, flashlight, or vertical grip depending on your playstyle.
Internally, accuracy is ensured by the TDC Magnus™ rotary hop-up chamber (TDC = Top Down Center), designed to provide more precise adjustment. It is complemented by a Helium™ Flat Hop Eraser, intended to improve trajectory stability through more consistent support. The replica also features a 6.03 mm precision barrel, delivering a straighter and more consistent trajectory, even when you’re aiming to maximize the platform’s effective range.
All these internal components are centered around the Æther™ gearbox, whose reinforced chassis is designed for reliability and consistency. Compatibility with springs up to M140 allows you to upgrade the replica to adapt it to the limits and rules of the fields where you play, or simply to suit your playing style. The internals also include 8 mm bearings, steel gears, a polycarbonate piston with metal teeth, and a base designed to withstand regular use without a rapid decline in performance.
The standout feature of this replica is the HAL™ ETU MOSFET, which uses magnetic detection (Hall effect). It allows for full programmability of the SA-FH06 FLEX Gen2 and offers excellent trigger response. With this MOSFET, you’ll find features such as active brake, binary mode, trigger sensitivity adjustable across 5 levels, pre-cocking adjustable across 6 levels, and programmable firing modes in AUTO and SEMI. Programming via the trigger allows you to quickly adjust the gun’s performance without needing additional equipment, and the low-battery alarm ensures safe use of the replica. The SA-FH06 also features the ESA™ quick-spring-change system, which allows you to efficiently adjust the power to suit different terrains or your playing style.
The SA-FH06 Gen2 FLEX HAL ETU is therefore a lightweight, modular, performance-oriented HK416-style replica with a reinforced internal mechanism and a HAL MOSFET ready for use right out of the box.
The first time you use it, after connecting the battery to your replica, you will hear the HAL ETU™ system’s beep.
After hearing it, hold the trigger in SAFE mode for about 5 to 10 seconds to activate the module and begin using your replica.
For regular maintenance of your SA-FH06 Gen2 FLEX HAL ETU Specna Arms AEG replica, you can clean the inside of the barrel with a piece of paper towel at the end of a cleaning/cleaning rod.
A simple wipe with a dry or slightly dampened microfiber is all it takes to clean the outside of the replica.
The stock tube of the SA-FH06 Gen2 FLEX HAL ETU Specna Arms AEG replica supports an 11.1v LiPo battery with T-dean connectivity in single or double stick versions.
We recommend using high-quality 0.25g bullets with this SA-FH06 Gen2 FLEX HAL ETU Specna Arms AEG replica.
Store your SA-FH06 Gen2 FLEX HAL ETU Specna Arms AEG replica in a dry, ventilated area to prevent wear and corrosion.
We also recommend storing your battery in a protective LiPo bag.
1 x Replica SA-FH06 Gen2 FLEX HAL ETU Specna Arms AEG
1 x S-Mag Hi-Cap 380 ball magazine
1 x Additional M90 spring
1 x T-Dean / Mini Tamiya adapter
Important note concerning the use of this product : This product is a replica weapon intended for recreational use (role-playing games) known as "airsoft", the sale of which is prohibited to minors (under 18 years of age). By adding this product to your basket, you acknowledge that you are over 18 and that you are familiar with the basic safety rules for using this type of replica (wearing protective glasses and/or mask, suitable location, etc.).
Please note that the power ratings given for airsoft replicas may vary depending on supplier availability. We invite you to contact us for more details before your purchase in order to have a more precise measurement carried out by us. Consequently, OPS-Store cannot be held responsible for any discrepancies between supplier data and actual measurements.
You must enable cookies to use this site.
To find out how to enable cookies on your browser, go to the following page:
https://www.accepterlescookies.com/
