Replica Tokyo Marui SCAR H EGLM Assault Custom

A SCAR-H Next Gen replica ready for assault by OPS Factory

OPS Factory has been designing custom replicas since 2015 and has established itself as a central element of the company thanks to its unique expertise and in-depth knowledge of products. Designed with the passion of our technicians, they created this Tokyo Marui SCAR H EGLM Assault Custom replica. They turned this long replica with an elegant design into a monster of performance and area clearing.

The SCAR-H EGLM is an internally optimized model featuring a VFC MK13 grenade launcher, delivered in a 100 cm rigid polymer GLARY CASE with egg-crate foam and pre-cut EVA foam. Inside this case, you will find the fully equipped replica with its 90 bbs magazine.

This unique replica will provide you with outstanding performance during your games thanks to the internal and external modifications carried out by the OPS Store workshop.

Become the asset of every assault

The Sightmark red dot sight on this replica makes it easier to acquire your targets, while the DBAL-A2 WADSN box will allow you to highlight them. With the combination of these two elements, your opponents will no longer be able to hide and will not escape your sight.

The grenade launcher will allow you to quickly defuse tricky situations, launch assaults, and clear rooms or corridors with ease. The included ACETECH grenade will let you “spray” your opponents with bbs thanks to its wide dispersion range.

Likewise, the TITAN V2 NGRS from GATE installed in the gearbox allows you to program 3 fire selector modes, switch full auto to 3-burst mode, activate AUG mode, adjust trigger sensitivity, enable cycle detection, protect your battery, receive a low-battery warning, set the active brake manually, diagnose your replica, and perform updates. It is also possible to upgrade the firmware, unlocking many more features for an additional cost. All these functionalities will allow you to adapt your replica to your playstyle and needs.

The Da Vinci Airsoft Raizen AEG precision barrel with a diameter of 6.01 mm and a length of 303 mm, along with the Maple Leaf Macaron 60° Hop-Up bucking and the Maple Leaf Omega 50° silicone Hop-Up tensioner, improve accuracy and range, making it easier to hit your targets once acquired.

To make the replica more reliable, reactive, and powerful, an SHS High Torque motor, a 14-tooth piston with POM ball-bearing piston head from FPS Softair, an M100 spring, and a spring guide were installed.

A massive replica that will tip the balance in your favor

The SCAR-H EGLM Assault Custom replica from the OPS Store workshop is a true Swiss Army knife, allowing you to perform both defensive and offensive tasks with ease. It is a complete replica, ready for any situation.

Its striking power makes it a top choice whether you play in open fields or confined spaces. It has been designed to make its user as versatile and formidable as possible while maintaining good maneuverability.

Become the key player in your airsoft games with this complete assault setup!

You will find in this Tokyo Marui SCAR H EGLM Assault Custom replica

Internals
- TITAN V2 NGRS Basic Module front wiring GATE
- SHS High-Torque Long Motor
- 14-tooth SCAR Recoil Shock Next Gen Marui piston FPS Softair
- Next Gen POM ball-bearing piston head FPS Softair
- GUARDER SP100 spring
- CNC ball-bearing spring guide for Scar Next Gen Marui FPS Softair
- Tokyo Marui Next Generation M4 nozzle with O-Ring FPS Softair
- Da Vinci Airsoft Raizen AEG 6.01 mm x 303 mm precision barrel
- Maple Leaf Macaron 60° Hop-Up bucking
- Maple Leaf Omega 50° silicone Hop-Up tensioner (Solid Edition)

Externals
- Tokyo Marui Next Gen SCAR-H Black AEG replica
- SIGHTMARK Ultra Shot R-Spec black red dot sight
- WADSN DBAL-A2 Aiming Device ABS Lamp Version
- VFC MK13 mod 0 launcher module - Black
- 100 cm waterproof transport case Black GLARY CASE

You will benefit from a 24-month OPS Store warranty on all parts. It will not cover any opening or modification made by a third party outside OPS Store.

• How to maintain your SCAR-H Next Gen Black Tokyo Marui AEG replica?

  For regular maintenance, you can clean the inside of the barrel with a piece of paper towel attached to a cleaning / unjamming rod.

  A simple wipe with a dry or slightly damp microfiber cloth is enough to clean the exterior of the replica.

• Which battery to use with the SCAR-H Next Gen Black Tokyo Marui AEG replica?

  The stock being a restricted space, it is recommended to use a 7.4v LiPo battery with a T-dean connector, either in a single stick or very thin double sticks format.

• Which bbs to use with the SCAR-H Next Gen Black Tokyo Marui AEG?

  We recommend using high-quality 0.28g bbs or 0.30g bbs with this airsoft replica.

• How to store your SCAR-H Next Gen Black Tokyo Marui AEG replica?

  Store your replica in a dry and ventilated area to avoid wear and corrosion.

  It is also recommended to store your battery in a LiPo safety bag.

1 x Replica Tokyo Marui SCAR H EGLM Assault Custom
1 x SCAR-H 90 bbs magazine
1 x 40mm AceHive Gas Grenade ACETECH
1 x Ultra Shot R-Spec red dot sight Black SIGHTMARK
1 x DBAL-A2 Aiming Device ABS Lamp Version WADSN
1 x VFC MK13 mod 0 launcher module - Black
1 x Waterproof transport case 100 cm Black GLARY CASE

• Custom replica
• Caliber 6 mm
• Propulsion AEG
• Battery slot Stock
• Connections T-Dean
• Wiring Rear
• Shooting mode Safe / Semi / Auto
• Speed 350 FPS
• Length 635 / 825 mm
• Weight 4950 g
• Canon internal model EG Barrel Prometheus precision barrel
• Internal barrel length 295 mm
• Internal barrel diameter 6.01 mm
• Recommended grammage 0.28 - 0.30 g
• Integrated tactical rail Yes
• Charger Mid-cap 90 bbs magazine
• How it works Adjustable Hop Up
• Blowback Yes (Recoil Shock)
• Engine Samarium cobalt
• Gearbox Version Gearbox specific
• Mosfet Mosfet TITAN V2 NGRS Basic
• Body Aluminium / polymer
• Colors Black
• Brand OPS-Factory